Exposed fastened, bell-top rib panel applies over open framing or solid substrate for multiple applications.
Panel Coverage: 36″
Rib Height: 3/4″
Rib Features: Bell top trapezoidal rib on 9″ centers
Standard Gauges: 26 ga., 29 ga.
Wherever you have two roof planes coming together at an angle, you get either a peak or a valley. Since so much water flows through the roof valleys, they must be protected by extensive roof flashing networks to keep your roof dry and leak-free. With the peaks, a special covering called a ridge cap must be used.
Formed Ridge: Molded to Panel
Standard Ridge Metal: Sized to Fit
Parapet Cap Metal
The top of a parapet wall is vulnerable to moisture penetration problems. Cap Metal is an effective way to eliminate this condition.
High Wind Up-lift Resistance
Any Size & Length Available
Installed with Cleat Metal
Secured with Grommeted Fasteners
Custom Drip Edge
Drip edge is a metal flashing that is installed at the edges of the roof to help control the flow of water away from the fascia and to protect the underlying roofing components.